Lights and buttons on the product control panel. Do not push the paper too far into the product. Make sure that the carriage can move freely across the width of the product by gently pushing the carriage to the left and then to the right. Never load mixed types of paper in the tray. Clean the rollers Dust or paper residue on the rollers inside the product might cause paper feed issues.

Uploader: Daikree
Date Added: 24 June 2015
File Size: 64.63 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 19181
Price: Free* [*Free Regsitration Required]

Slide the cartridge at a slight upward angle into the 55522 slot, and then gently push it forward until it snaps into place. The Power light blinks In this normal condition, the following light pattern displays on the product control panel:. Reskjet Follow these steps to replace the tri-color cartridge. Touching these parts can result in clogs, ink failure, and bad electrical connections. This feature helps to avoid wasting ink and paper if the paper is not what you expected.

Clean the rollers Dust or paper residue on the rollers inside the product might cause paper feed issues.

The following sections describe the most common combinations of blinking lights, followed by solutions for each combination. If the issue persistscontinue to the next solution.

Remove the new cartridge from its package, and then carefully remove the protective tape. Do not remove jammed paper at this stage.

See Also  HP PHOTOSMART C6180 ALL IN ONE DRIVER

HP Deskjet 5552 Standard Inkjet Printer

Even small pieces of paper can cause paper feed issues. Clean the paper rollers through the rear access door Gather the following materials:. The Power light and the Resume light are on In this error condition, the following light pattern displays on the product control panel:. Before you begin, make sure that the cartridges are compatible with your product.

Blinking Lights on the HP Deskjet 5551 and 5552 Printers

The carriage moves to the center of the product. You need to use 10 to 25 sheets of paper only for purposes of these troubleshooting steps. Press the buttons on the sides of the duplexer at the same time, and then pull the duplexer toward you to remove it. How to print a self-test report Make sure that plain white paper is loaded in the input tray. Find the blinking lights pattern you are experiencing, and then follow the steps to resolve the issue.

If the carriage is stuck on the left side of the productmove the carriage to the right side of the product. Slide the paper length guide inward. The product might go through a warm-up period which might last up to two minutes.

HP Deskjet Standard Inkjet Printer | eBay

Purchase replacement cartridges and other supplies from the HP Inkhet or local retailers. Javascript is disabled in this browser. If the product connects to a power strip, check the switch on the power strip to make sure that it is turned on. Clean the paper rollers through the duplexer Gather the following materials:.

See Also  COMPAQ PRESARIO C765TU AUDIO DRIVER DOWNLOAD

If the carriage 55552 stuck on the right side of the productmove the carriage to the left side of the product.

Turn the printer off and then on again Follow these steps to turn the product off and then on again. Perform a power reset Sometimes, resetting the product can clear a dskjet feed issue.

Clean the paper rollers Your product has either a rear access door, or a duplexer.

Blinking Lights on the HP Deskjet and Printers | HP® Customer Support

If these steps resolved the issueyou do not need to continue troubleshooting. The yellow arrow points to the Tri-color Cartridge Problem icon. Remove paper from the front of the product. If the paper tears when you remove it from the rollers, check the dsekjet for torn pieces of paper that might remain inside the product. Remove any loose sheets of paper from cplor input tray and the output tray. Disconnect the power cord from any power strip or surge suppressor, and then plug it directly into the wall outlet.

With the product turned ondisconnect the power cord from the rear of the product.